| Treats two pain areas |
| Output Intensity: | 0-100mA (500 ohm load)adjustable on level 0-20 |
| Frequency (Pulse rate): | 1-200Hz - 50 selectable frequencies |
| Pulse Width: | 10 selectable settings, 25, 50, 75, 100, 125, 150, 175, 200, 225 & 250µs |
| Waveform | Symmetrical bi-phasic rectangular |
| Output: | Constant current |
| 5 selectable modes: |
| 1. Constant | |
| 2. Burst I | Fixed 2 burst per second. Each burst consists of 7 pulses. Pulse width adjustable. |
| 3. Burst II | Fixed 1 burst per 2 seconds. Each burst consists of 80 pulses. Pulse width and frequency are adjustable. |
| 4. Width Modulation | Pulse width modulates between 25-250µs, ramp up for 8 seconds and ramp down for 8 seconds. Frequency is adjustable. |
| 5. Rate Modulation | Frequency modulates decreasing from 100Hz to 20Hz in a period of 8 seconds. The frequency then increases from 20Hz to 100Hz in the next 8 seconds. The pattern is then repeated. |
| Timer: | 7 selectable settings: a. continuous b. 10 minutes c. 15 minutes d. 20 minutes e. 30 minutes f. 45 minutes g. 60 minutes |
| Memory: | Saves last mode attempt in memory i.e. the next time the unit is used it will start again at the same setting as before. This memory is erased when batteries are changed. |
| Mode Change: | When the mode is changed, the intensity level will drop to back to zero. It will then gradually increase to the level set by the user. |
| Display: | In both modulation modes, output changes are visible on display. |
| Load detector: | If an electrode should accidentally detach itself from the body or the leadwire, the intensity will drop to zero. |
| Automatic Shutdown: | If intensity levels are at 0 on both channels and if the unit has not been in use for five minutes, it will shut down automatically. |
| Professional Function 1 | Permanent time used memory: Memorizes up to 99 hours used time. Display appears in hours and minutes. |
| Professional Function 2 | Number of times used: Provided the unit is in use for more than 5 minutes with the intensity activated, the unit will memorize the number of times the unit is used. |
| Professional Function 3 | Patient Lock/unlock: Option to lock and unlock device settings. |
| Power Source: | 2 x 1.5v AA batteries (Type LR6) |
| Battery Life: | 100 hours approx. |
| Low battery indicator | A flashing symbol indicates low battery. |
| Weight: | 100 grams |
| Size: | 10.5cm x 6.5cm x 2.75cm (4 1/8" x 2 9/16" x 1 1/8") |
| Output Jack Size: | CE Touchproof |
| Attached Belt Clip. |