|
| Channels: | Dual Channels, Isolated between channels. | Output: | Two independent output terminals. |
| Wave Form: | Asymmetric biphasic square pulse | Amplitude: | 0 to 40 volts |
| Pulse Width: | 50 to 300 microseconds, adjustable. | Frequency: | 2 to 150 Hz, adjustable. |
| Charge per Pulse: | 80mA x 250 microseconds (500ohm test load). | Size: | 59x23.7x101mm |
| Maximum Voltage: | 0 to 80 volts | Maximum Charge: | 20 microcoulombs per pulse maximum, positive pulse and negative pulse seperate. |
| Modes: | 1.Burst Mode: 7 pulses per burst / 2 bursts per second / 100 Hz internal frequency of burst
2.Normal
3.MRW: Pulse rate and pulse width show alternating periodic change
4.SD: Pulse rate and pulse width show alternating periodic change
5.Bi-Pulse: Channel 1 fixed output pulse rate at 100Hz, Channel 2 fixed output pulse rate at 4Hz. Continuously output for 1 second and then stop output for 1 second, complete cycle at period 2 sec | Package: | (1) Controller unit (2) 9v battery (3) instructional manual (4) Lead wires (5) self-adhesive electrodes (6) carrying case. |
| Low battery: | Indicator illuminate when the power supply voltage falls below 6.5 volts | Weight: | 124 grams (including battery). |
| Timer: | 1 to 90 Minutes & a patient compliance timer. |
| Power Source: | 9V DC square shape battery | Accessories: | Plastic belt clip. |
